The Creaform handheld 3D scanner is one of the leading 3D scanning devices today, widely used in industries from mechanics, automobiles to medicine and cultural heritage. However, in practice, many people often encounter common errors that affect the accuracy of the scan data as well as reduce the life of the device. This article will help you identify those errors and guide you on how to properly maintain the machine to extend the life of the device.
2.1. Not Calibrating the Machine Regularly
Calibration is an important step to ensure the accuracy of the 3D scanner. However, many users ignore it or only calibrate it when the machine has problems. If you do not perform regular calibrations as recommended by the manufacturer, the scan data may be distorted, reducing the quality of the 3D model. You should check and calibrate the machine once a month or according to the frequency of use to ensure the best performance.
2.2. Use in Substandard Environments
The Creaform 3D scanner works best in environments with stable lighting, no dust, and low humidity. If you use the machine in environments that are too bright, dusty, or too hot, the machine's sensors may be affected, reducing the quality of the scan. To optimize results, make sure the workspace is always clean, avoid direct sunlight, and use it in ideal temperature conditions.
2.3. Not Checking the Machine Status
Many people use 3D scanners continuously for long periods of time without checking the machine's operating status. This can lead to wear and tear on components, reducing the life of the device. Before each use, you should check the battery, machine temperature and technical warnings to ensure stable operation.
2.4. Not upgrading software and firmware to the latest version
Control software plays an important role in optimizing 3D scanning performance. If you do not update to the latest version, you may encounter software errors, lose important features or not be able to take advantage of technological improvements. Therefore, regularly check and update the software from the manufacturer to ensure the machine always operates at its best performance.
3.1. Clean the Machine Regularly
To ensure the 3D scanner always works well, it is necessary to clean it regularly and properly. Use a soft, dry or slightly damp cloth to clean the surface of the machine (specialized cloth), avoid making the cloth too wet because water can seep into the gaps.
The glass surface (lens) of the 3D scanner should not be cleaned too often, as it can easily cause scratches or affect the optical coating. Only clean when there is obvious dirt, use a microfiber cloth and a specialized solution, and wipe gently to avoid damage.
After cleaning, place the machine in a dry, well-ventilated place before storing it in a moisture-proof box to avoid condensation inside, affecting the components.
3.2. Periodic inspection and calibration
Perform periodic calibration according to the manufacturer's instructions to ensure that the machine always maintains the highest accuracy. If there is any deviation in the scan data, re-check the calibration immediately.
3.3. Proper Storage
The 3D scanner should be stored in a specialized protective box when not in use. Avoid placing the machine in places with extremely high or low temperatures, and do not expose the machine to direct sunlight for long periods of time.
3.4. Use a Stable Power Source
Creaform 3D scanners usually use batteries or are connected directly to a power source. To avoid short circuits and fires, you should use a stable power source and avoid letting the battery run out completely before charging.
3.5. Check and Update Software and Firmware Regularly
Always check and update the device's control software and firmware to ensure the device always has the best performance. Manufacturers regularly release updates to improve scanning algorithms, increase processing speed and fix system errors.
Proper use of Creaform 3D scanners not only helps ensure scan quality but also prolongs the life of the device. By avoiding common mistakes and following maintenance procedures, users can optimize the performance and accuracy of the 3D scanner.
>>>> See more: Creaform Handheld 3D Scanner / Reputation - Quality - Good Price
Website: https://3dmaster.com.vn
Hotline - Zalo - LINE - Telegram - WhatsApp - Viber - Kakaotalk: +84 982 089 198 | 0986333960
Email: cuong3dmaster@gmail.com | hung3dmaster@gmail.com | tech3dmaster@gmail.com
