PolyWorks là phần mềm mạnh mẽ chuyên xử lý kết quả từ các hệ thống đo/ quét 3D. Nguyên lý của phần mềm là lồng ghép kết quả đo/ quét 3D với thiết kế 3D nguyên mẫu để xuất ra các kết quả đo kiểm mong muốn. Đồng thời phần mềm cung cấp công cụ đo kiểm 3D thông minh xuất ra mọi phép đo 3D trong quy trình sản xuất thông qua các sản phẩm đơn chiếc và cụm lắp ráp.
PolyWorks|Inspector™ is a powerful industrial 3D metrology software solution to control tool or part dimensions, diagnose and prevent manufacturing and assembly issues, guide assembly building through real-time measurements, and oversee the quality of assembled products by using non-contact point cloud digitizers and single-point contact-based probing devices.
Inspecting and analyzing a measured part is only possible if the digitized data is properly positioned and oriented in 3D. Typically, a measured part is aligned to its nominal CAD model to enable the extraction and comparison of nominal and measured dimensions. It can also be assembled virtually to the surrounding mating parts in order to check for interference issues or to analyze flush and gap deviations.
PolyWorks|Inspector™ offers a broad range of part alignment techniques that let users construct alignments with:
At the core of the PolyWorks|Inspector™ workflow is the extraction of measured part dimensions and computing the deviations to their corresponding nominal dimensions. Thanks to the remarkable flexibility integrated into PolyWorks, dimensions can be extracted from measured point clouds, polygonal models built from point clouds, or probed points. Nominal dimensions can also be extracted from a CAD model or a reference measured part.
PolyWorks|Inspector™ delivers the complete toolbox you need to extract and analyze:
PolyWorks|Inspector™ also offers real-time guidance to accurately build and inspect fixtures and jigs using single-point measurement devices.
PolyWorks|Inspector™ provides an outstanding updateable reporting technology that guarantees the exactness of a report and dramatically accelerates multipiece inspection.
Report items, such as 3D scene screenshots and result tables, are automatically updated if a project is altered. You can modify the parameters of a project, or replace the measured data points of the current piece by the data points from a new piece, knowing that the entire inspection report will automatically be updated.
The PolyWorks|Viewer™ enables your colleagues, managers, and suppliers to review your inspection projects in 3D.